-
Phone: +(90) 332 501 06 06
-
Email: info@rollbend.com.tr
-
Working Hours: Monday - Friday 08:30 - 18:00
- SUPPORT
ROLLBEND
• 2 roller balls were driven by the gear system from the reducer.
• Steel construction body
• Upper shaft moves idle
• Roller balls are hardened
• Roller shafts are hardened and ground from special steel
• Standard 1 set of roller balls
• Adjustable side supports
• Horizontal and vertical working
• Mobile control panel
• Compliance with CE standards
• Special rolls for Pipe and Profile
• Double speed
• Angle bending rolls
• Special side supports for angle iron
• Precise bending with braked motor
| Engine Power (kw) | 0.75+1.1 |
|---|---|
| Roll Rolls (Ø mm) | 138 |
| Shaft/Shaft (Ø mm) | 50 |
| Working Speed (m/min) | 4.5 |
| Machine Size W X L | |
| Weight (kg) | 375 |
| BENDING CAPACITIES | |||||
| NO | Profile Type | RPB 40 | Note | ||
| Size | Min Dia. | ||||
| 1 |
 |
35 x 8 | 300 | Standard Rolls | |
| 2 |
 |
50 x 12 | 400 | Standard Rolls | |
| 3 |
 |
20 x 20 | 300 | Standard Rolls | |
| 4 |
 |
Ø22 | 230 | Optional Rolls | |
| 5 |
 |
Ø40x1,5 | 500 | Optional Rolls | |
| 6 |
 |
1 ” x 2 , 3 | 450 | Optional Rolls | |
| 7 |
 |
30x15x2,5 | 500 | Optional Rolls | |
| 8 |
 |
25x25x2 | 450 | Optional Rolls | |
| 9 |
 |
35x35x5 | 400 | Optional Rolls | |
| 10 |
 |
30x30x4 | 550 | Optional Rolls | |
| 11 |
 |
30x30x5 | 300 | Standard Rolls | |
| 12 |
 |
35x35x5 | 350 | Standard Rolls | |
| 13 |
 |
35x35x5 | 300 | Standard Rolls | |
| 14 |
 |
UPN 40x20 | 350 | Optional Rolls | |
| 15 |
 |
UPN 35x18 | 500 | Standard Rolls | |
# Special washer may be required / ## Special tool required
Capacities are given according to 260 N/mm² sheet yield strength. / Technical information may be changed without prior notice.